Product Category

All categories



FRONT PUSH METAL BALER

It can extrude every kinds of scrap metal, steel shaving, waste copper and waste aluminum into qualified charging such as square column, cylinder, octagon body and other sharps.

SEND EMAIL

Description

METAL BALER

products ● It can extrude every kinds of scrap metal, steel shaving, waste copper and waste aluminum into qualified charging such as square column, cylinder, octagon body and other sharps.

● The hydraulic driving is adopted for the machine.

● The manual or PLC automatic control operations.

● Installation does not need the foundation screw.

● Can choose diesel engine drive or motor drive.

● Three out-bag ways:turn out, side push, front push.

● The chamber box size and bale size can according to the customer request.

● Voltage/frequency can according to customer requirement.

● Can add two sides of knives and teeth on the chamber box.

● Can be equipped with cooler or heater.

PRODUCT OVERVIEWS

products

PRODUCT PARAMETERS

Model	Nominal Force	Press Box Size	Bale Size	Bale Density	Capacity	Cycle Time	Power	Bale Discharging /Operation
Model	(kn)	(LWH)(mm)	(W*H)(mm)	(kg/m³)	(kg/h)	(s)	(kw)	Bale Discharging /Operation
HC81Q-1350	1350	1100×600×600 1300×600×600	(50-300)×600×240	≥1800	1800-2500	150	18.5 22	Forward-out, manual valve control