Product Category

All categories



TURN-OUT METAL BALER

It can extrude every kinds of scrap metal, steel shaving, waste copper and waste aluminum into qualified charging such as square column, cylinder, octagon body and other sharps.

SEND EMAIL

Description

HC81 SERIES TURN-OUT METAL BALER FEATURES

products ● It can extrude every kinds of scrap metal, steel shaving, waste copper and waste aluminum into qualified charging such as square column, cylinder, octagon body and other sharps.

● The hydraulic driving is adopted for the machine.

● The manual or PLC automatic control operations.

● Installation does not need the foundation screw.

● Can choose diesel engine drive or motor drive.

● Three out-bag ways:turn out, side push, front push.

● The chamber box size and bale size can according to the customer request.

● Voltage/frequency can according to customer requirement.

● Can add two sides of knives and teeth on the chamber box.

● Can be equipped with cooler or heater.

PRODUCT OVERVIEWS

products

PRODUCT PARAMETERS

Model	Nominal Force	Press Box Size	Bale Size	Bale Density	Capacity	Cycle Time	Power	Bale Discharging/Operation
Model	(kn)	(LWH)(mm)	(W*H)(mm)	(kg/m³)	(kg/h)	(s)	(kw)	Bale Discharging/Operation
HC81F-1250	1250	1200×700×600	300×300×/Octagon (150-400)×250×250	≥1800	1000-1500	120	15	Turn-out, manual valve control
HC81F-1600	1600	1600×1000×800	(400-600)×350×350 (400-600)×400×400	≥1800	2000-3000	150	22	Turn-out, manual valve control
HC81F-2000	2000	1600×1200×800	(400-700)×400×400	≥1800	2500-4000	160	30/37	Turn-out, manual valve control
HC81F-2500A	2500	2000×1400×900	(400-700)×500×500	≥1800	3500-5000	160	44	Turn-out, manual valve control